Liist Studio https://liistudio.com Grow Your Knowledge Sun, 09 Jan 2022 18:15:20 +0000 en-US hourly 1 https://wordpress.org/?v=5.8.3 https://liistudio.com/wp-content/uploads/2020/09/cropped-Untitled-design-32x32.png Liist Studio https://liistudio.com 32 32 Top 4 Mistakes in HVAC Repairs to Avoid for Homeowners https://liistudio.com/top-4-mistakes-in-hvac-repairs-to-avoid-for-homeowners/52114/ Sun, 09 Jan 2022 18:15:17 +0000 https://liistudio.com/?p=52114 In the US, 91% of households have air conditioning, so it’s very likely yours does too. As time…

The post Top 4 Mistakes in HVAC Repairs to Avoid for Homeowners appeared first on Liist Studio.

]]>
In the US, 91% of households have air conditioning, so it’s very likely yours does too. As time goes on, it’s inevitable that you’ll run into some common HVAC problems.

But did you know there are right and wrong ways to handle repairs? If you go down the wrong route, it’s sure to cost you dearly!

To stay on the right path, keep reading for the top 4 mistakes in HVAC repairs you need to avoid as a homeowner.

1. Waiting Too Long

Maybe you hear, smell, or see something that might be wrong with your HVAC system. But because you want to save some money, you think to yourself, “let’s just wait and see if it resolves itself.”

This is one of the worst things you can do! If you catch problems early on, they’ll be much easier and cheaper to fix.

If you keep waiting, you’re only delaying things. This gives time for an issue to grow, which means it’ll take more time and money to rectify.

2. DIYing Things

Disclaimer here: if you have experience or a background in HVAC services, then by all means, you should go ahead and DIY what you’re comfortable with.

Otherwise, you shouldn’t DIY repairing HVAC systems. Chances are, you don’t know what you’re doing, and you’re bound to make problems worse than better.

This also goes for using duct tape to fix your issues. It’ll only be a temporary fix and your HVAC problems will only get worse, not better.

Do yourself a favor and hire a reputable HVAC company to perform HVAC repair service for you.

3. Skipping Regular Maintenance

Another big mistake is skipping regular maintenance.

You might think it’s a huge racket for HVAC companies to make some extra money, but it really isn’t. It’s a much-needed service that not only keeps your system in working order, but also catches any small issues before they become giant ones.

In the end, spending a little money on routine maintenance will be more cost-efficient for your HVAC repair budget than waiting until something’s wrong to call in the pros!

4. Hiring the Wrong Company

Not all HVAC companies are equal, so be careful when hiring someone. Do your due diligence and look around instead of settling on a business straightaway.

Don’t try to save a few bucks by hiring the cheapest contractor, as things are sure to go wrong. As a result, this can end up costing you significantly more. Not only will you have to pay for the initial contractor, but also for the next one to fix their mistakes.

Avoid These Mistakes in HVAC Repairs

These are the common mistakes in HVAC repairs that many homeowners use. Now that you know all about them, you can avoid following in their footsteps. Instead, you can keep your HVAC unit in working order, all without spending a fortune on major blunders!

For more on home improvement, take a peek at our other blog posts now!

The post Top 4 Mistakes in HVAC Repairs to Avoid for Homeowners appeared first on Liist Studio.

]]>
Writing Projects You Can Do on a Full Load https://liistudio.com/writing-projects-you-can-do-on-a-full-load/52097/ Thu, 06 Jan 2022 16:09:31 +0000 https://liistudio.com/?p=52097 It can be tough to fit writing projects into a whole load of school, work, and life. But…

The post Writing Projects You Can Do on a Full Load appeared first on Liist Studio.

]]>
It can be tough to fit writing projects into a whole load of school, work, and life. But there are many different types of writing projects someone can do on the go, so it’s not impossible. The great thing is that someone can genuinely write about anything. So even if someone thinks their idea is boring, it doesn’t matter—there’s enough time to turn the ordinary into something extraordinary. 

If you’re looking to hire someone’s article or blog writing services and have them write for you, there are always plenty of professional creatives available.

The writing projects listed below are simple, and some of them do not require any research. So whether at home or on a bus, there will always be a chance to improve a writing style and let creativity shine through.

Personal Narratives

There’s nothing better than being in front of a new audience who has never heard someone’s story before. Lives are full of exciting stories that could impact somebody out there.

A person doesn’t necessarily have to share everything from A-Z, but they should try to include memories from their past that people would be able to relate to. A personal narrative project allows them to take creative risks and not be afraid of what anybody thinks.

Reflections

If written carefully, reflections can give others insight into a life journey so far. The reflections don’t have to be lengthy—or even perfect. Personal stories are always easiest for people to read because it’s like they’re reading the diary of somebody they never knew before.

When writing about reflection, a person should share lessons learned or insights gained along the way. Since this is about the person, there tends to be more emotionally involved than other story types.

Short Stories

Short stories can be tricky because people want them short enough to avoid dragging on too long, but they also don’t want them to feel incomplete. Therefore, this is an excellent writing project for when someone has a little more time on their hands, such as riding the bus or waiting in line at the grocery store.

The idea is to write something that feels complete but could also be continued by somebody else. In addition, it helps ensure variety, so readers don’t get bored too quickly.

Non-Fiction

Non-fiction stories can include anything from science experiments gone wrong to sports accomplishments. Most non-fiction pieces require research because nobody must question the content being shared.

Whether sharing exciting facts or describing what happened during an event, this writing project allows a person to practice presenting information in a way that keeps people engaged and wanting more details.

Poetry

The only thing better than sharing a story is sharing a piece of heart and soul. Poems can be entertaining to read, but they require research as non-fiction does. The idea is for readers to get insight into someone’s innermost thoughts and how they see the world around them.

Writing poetry should never feel forced because it will show in the final product. Instead, a person should try writing about anything that moves them deeply—the process itself almost always ends up being therapeutic.

Blogging

Blogs can cover almost any writing project. But if someone writes a blog, it’s worth considering how often they should update the world on their discoveries and insights. Their blog posts could contain anything from personal stories to reflections or non-fiction pieces like anything else listed here.

Since blogging is about sharing information online for free, there tends to be a lot of competition, and readers may not feel motivated to stick around longer than a few minutes if they’re provided with nothing useful.

Writing a blog may not be for everyone, blog writing services can help.

Creative Writing

A person has to have an imagination before trying creative writing because this project requires being as descriptive as possible. Whether short stories or non-fiction pieces, a person should try to include as many sensory details as possible because readers love feeling like they’re right there, living through every moment.

Creative writing is entertaining and an excellent way for other writers to get feedback on their works in progress.

Travelogues

If a person is crafty, they should try keeping a travelogue of their journeys before the memories fade away. Travelogues are typically easy to write because a person has to fill in the blanks with pictures. A travelogue might include images from past vacations or trips, but it’s a great way to document anything that takes place outside a daily routine.

Captions also play an essential role since they help tell more of the story and add context to the images included.

Conclusion

Every writing project on this list can be completed if a person makes themselves available for enough time to produce meaningful content. The trick is finding a way to balance all other responsibilities while still making progress on the work. There’s always something interesting to share about life, and it’s up to each individual how fascinating their words will end up being.

The post Writing Projects You Can Do on a Full Load appeared first on Liist Studio.

]]>
Benefits of Dimensional Testing in Plastic Injection Molding https://liistudio.com/benefits-of-dimensional-testing-in-plastic-injection-molding/52090/ Wed, 05 Jan 2022 15:41:18 +0000 https://liistudio.com/?p=52090 Dimensional Inspection Equipment: Hand Tools – Consist of a simple inspection equipment to measure dimension. Optical comparators –…

The post Benefits of Dimensional Testing in Plastic Injection Molding appeared first on Liist Studio.

]]>
Dimensional Inspection Equipment:
  1. Hand Tools – Consist of a simple inspection equipment to measure dimension.
  2. Optical comparators – This equipment use optic (light) projections on a photographic screen to measure dimensions
  3. Structured light scanners – Used with components where manual measurement is not possible
  4. Laser scanners – Laser based non-contact inspection method
  5. Vision System – Applicable where high accuracy and precision measurements are necessary. These systems are capable of reliable and quick measurements.
  6. Coordinate measuring machine – Advanced measurement technology, which senses discrete points on components to measure its dimensions. The following sections detail the working of a CMM machine and its benefits.

What is CMM

While manufacturing a component, dimension and geometry inspection is an important step. Using conventional methods and measuring instruments such as micrometers and depth gauges can give rise to open errors, which can potentially jeopardize the production process. 

Whereas, a CMM machine on the other hand uses well automated and pre-defined inspection methods, resulting in accurate measurements. Therefore, studies have revealed that using a CMM (Coordinate Measuring Machine) shall minimize the errors largely.

CMM employs coordinate technology to measure the dimension of a manufactured part using a probe to sense discrete points on the components’ external surface. Probe position is controlled by a computer or manually by an operator. It gathers the measurement value with reference to the pre-set three-dimensional Cartesian coordinate system. Probes are even capable of measuring inaccessible locations on the parts’ surface.

CMM Machine Components

  1. Mechanical probe or stylus: An important component of the CMM machine to measure dimension. The probe is resistant to temperature to give accurate and precise dimensional value. Ruby and zirconia are commonly used probe materials.
  2. Main Body or Table: The table is a robust and stable structure to support the CMM machine. Granite is often considered a suitable material for the CMM Table due to its resistance to temperature and other forces.
  3. Fixtures: Fixtures are used to mount and hold a component rigidly during the measurement. Rigid fixtures are therefore necessary to eliminate dimensional errors in measurement.
  4. Software: The probe movement with respect to a defined reference is analyzed by the software, which provides accurate measurement data. This software needs to be calibrated and updated in order to display accurate measurements. Polyworks and PC-DMIS are generally accepted as industry standard for CMM Measurements.

Types of coordinate measuring machine

Though advancements have been made to enhance the functioning of a CMM using various technologies, four CMM machine types are globally accepted for their reliability and measurement accuracy:

  1. Bridge Type CMM: The most stable type of all the four CMM types. Based on an application, Bridge type can either be a fixed and portable unit. Portable bridge types can provide inspection close to the machine.
  2. Gantry Type CMM: Used for the inspection of large parts. This type of CMM eliminates the need of lifting the parts onto a table as floor serves as the datum for the machine. Cost of this type of CMM is more when compared with other CMMs.
  3. Cantilever type CMM: As the name indicates, this type is fixed at one end overhang from another end, making it less rigid than other types with two-point support. It is limited to use only for small parts and allows access from all three sides.
  4. Horizontal Arm CMM: This type fixes their probes horizontally rather than vertically, as with other types. It is used for long and slender parts, which is out of range in machines. Generally, it is less accurate than other CMMs.

Benefits of CMM Dimensional Testing 

CMM,with its unique technology can save valuable time and cost for plastic injection molding companies. With the complexity in part design, precise and accurate measurement becomes essential. Utilizing CMM for injection molders will bring good results for a company with remarkable authentication.

  1. Saves time and cost – Using CMM for the measurement of component inspection reduces production costs and saves time in longer period.
  2. Guaranteed QA- Several benefits such as CAD comparison and reverse engineering with reliable results assist to achieve Quality Assurance requirements.
  3. Versatile – CMM machines measures all complex components and it is compatible for different sizes of components. A variety of probes and techniques can be integrated into CMM as per application.
  4. Less Labor – As CMM is a computer-controlled machine, it reduces manual involvement, minimizing human error.
  5. Accurate Results – Single reference point of components is w.r.t. to origin leads to reduction in measurement error.
  6. Flexibility – One fixture is sufficient for the mounting of various sizes and shapes.
  7. Hardware Life – Proper maintenance of CMM machine ensures longer life of components.
  8. Easily upgradeable – Only updating software system whole machine is upgraded.
  9. Cost-Effective – Though the initial investment is higher compared with conventional measuring techniques, ROI (return on investment) is lower for CMM. CMM benefits the owners through lesser labor cost, immediate error detection, and increased efficiency.

Reasons to incorporate dimensional inspection testing in Plastic Injection Molding

  1. Risk Management – Validate product dimensions before initiating the manufacturing process shall help in reducing liability and overall risk.
  2. Effective Decision – Making key decisions during the development process before it is late to make any changes.
  3. Determining process capability – Capability study of parts saves time and money. This is necessary when parts are subjected to harsh environments such as force, pressure, shear etc.
  4. Regulatory Compliance – Validating using a CMM ensures that your company’s parts are compliant with ISO and other International Standards.

Preventive Maintenance (PM) for CMM

PM is the essential for any machine, including CMM. If a proper maintenance schedule not planned and executed then machine life, overall performance reduces drastically. Therefore, PM should be done for all major components such as motor, bearings, controllers, and probe system.

Benefits of doing PM for CMM:

  1. Optimal Performance
  2. Long Component Life
  3. Diminished Downtime
  4. Reduces Repairing Cost

Conclusion

CMM machine measures physical and geometry property of manufactured components and needs few components such as body, fixture, probe, and software. Various CMM machines can be selected based on suitable applications with different probe types. CMM is the best machine for measuring manufactured components for precise and accurate results with all mentioned benefits.

The post Benefits of Dimensional Testing in Plastic Injection Molding appeared first on Liist Studio.

]]>
How to Extend The Lifespan of Your Dock https://liistudio.com/how-to-extend-the-lifespan-of-your-dock/52084/ Wed, 05 Jan 2022 11:31:32 +0000 https://liistudio.com/?p=52084 After you’ve had your dock installed, it’s easy to just enjoy it but forget about other aspects such…

The post How to Extend The Lifespan of Your Dock appeared first on Liist Studio.

]]>
After you’ve had your dock installed, it’s easy to just enjoy it but forget about other aspects such as maintenance. Before you know it, you’re seeing signs of damage or wear and tear that can turn into costly dock repairs. Regular maintenance will extend your dock’s longevity, and here’s how you can do your part.

Extending Your Dock’s Lifespan

Consistent Cleaning

Your dock is exposed to all sorts of elements, which can result in wear and tear among other problems. By making sure the area is regularly cleaned and doing it properly, you can be sure it will be able to weather more damage than before.

Depending on the material used to construct the dock, cleaning methods may vary. A good pressure wash to remove dirt and debris is always an option to consider, just be sure to get an expert or learn the proper ways of using a power washer. In most cases, keep the pressure below 600 pounds per square inch to avoid damaging your dock.

Safety Is Paramount

The longer you put off repairs and maintenance, the worse problems will become. Whenever you spot something on your dock damaged or missing, it is best to take action as soon as possible. There are no easy, temporary fixes, and these will only cause more damage.

By addressing problems when they first arise, you are making sure you have less work to do in the future, and that your safety is always assured when using the dock.

Watch Out For The Environment

With your dock situated outdoors as a key part of the local ecosystem, it is important that you recognize its impact. Pollution can be a big issue, so making sure that your dock maintenance is as environmentally friendly as possible helps in many ways. 

Avoid encroaching on any local wildlife habitat when constructing the dock, and the wider it is, the better it will be at keeping the water steady and not affect mineral deposits in the water or near the shoreline. When cleaning, use more gentle and biodegradable cleaning products.

Stains And Finishes

As part of the routine, it is advisable to re-stain your dock annually. Use a water-based stain to avoid harming local wildlife, and you should aim to do that in the colder months. This way, water levels are lower, and you can also ensure less pigments are washed into the water. 

A good stain does not just maintain the pristine look of the dock, but also prolongs the lifespan of your dock in the long run. 

Useful Additions

Be mindful of damage that can occur when there is impact between your dock and boat. Utilizing rub rails, or edging, on the dock will be very helpful. Check that whatever you are using is marine grade, and you can protect your dock from repeated collisions with the boat. 

Replacement

It is inevitable that wooden docks will see discoloration and some weakening over time. This can severely affect the stability and safety of your dock, as splinters and cracks start to appear. You also do not want to deal with rotten wood in any way. Be sure to check on the condition of the wood from time to time, a thorough inspection is always going to be a good option.

This way, you can replace any damaged wood straightaway, and maintain the overall condition of the dock better.

Use Pressure-Treated Wood

Due to the weather conditions in Florida, your dock can be exposed to a lot. You don’t want just any wood when you construct your dock; ensure that you use pressure-treated wood which is much tougher. Pressure-treated wood is meant to endure strong winds, high tides and hurricanes. A professional and experienced dock builder will be able to advise you about the best choices for your dock’s construction.

Conclusion

Just like any other part of your home, your dock deserves your careful attention and care throughout the year. By taking extra steps, you can extend the lifespan of your dock and ensure that your investment stretches as far as possible.

The post How to Extend The Lifespan of Your Dock appeared first on Liist Studio.

]]>
7 Features of the Best Life Insurance Policy That Can Ensure a Smooth Sailing for Your Loved Ones’ Future https://liistudio.com/7-features-of-the-best-life-insurance-policy-that-can-ensure-a-smooth-sailing-for-your-loved-ones-future/52109/ Wed, 05 Jan 2022 10:31:00 +0000 https://liistudio.com/?p=52109 India’s life insurance penetration is very low compared to what it should be. Not many people are aware…

The post 7 Features of the Best Life Insurance Policy That Can Ensure a Smooth Sailing for Your Loved Ones’ Future appeared first on Liist Studio.

]]>
India’s life insurance penetration is very low compared to what it should be. Not many people are aware of the insurance plans. They don’t know what is ulip or what a life insurance plan brings to their lives. 

It would be best if you had the protection of the best life insurance policy in India because accidents and misfortune can hit anyone. If you are the sole breadwinner of your family, what will your loved ones do if something happens to you? Who will take care of their needs? But if you have a life insurance cover, you can be assured that your loved ones will be protected against the financial stress of losing an earning member. 

A best life insurance plan is a necessary investment that makes you feel secure and gives you confidence in the knowledge that your family can continue living the same life, even if you are no longer there. 

Here are some of the features of the best insurance policy in India that makes it such an important investment in your financial portfolio. 

  1. Issued in the name of the policyholder

A policyholder is the one who pays the premium for the life insurance policy to be active. The contract is between him and the life insurance company. One of the main features of a life insurance is that it can only be issued in the policyholder’s name. While typically, the life insurance plan only has one policyholder, sometimes one may also be able to open a joint life insurance account. 

  1. Payable premium

A premium is an amount a policyholder is liable to pay to the insurer to cover their life. You can choose the premium amount as well as the frequency of payments as per your preference. However, you need to pay the premium amounts regularly to be able to enjoy the benefits when the time comes. 

  1. Maturity benefit

 A maturity benefit is paid to the policyholder when the policy term is completed, and the contract terminates. The insurer is liable to pay the sum assured only in two circumstances – when the policyholder dies or when the policy matures. However, if you invest in pure term plans, there is no maturity benefit because the sum assured is only paid at the time of death. 

A person working on his computer

Description automatically generated with medium confidence

Image Courtesy: Shutterstock

  1. Sum assured

This is a significant consideration when investing in a life insurance plan. Even the best life insurance policy in India will fail to deliver its benefits if you do not choose the sum assured accurately. It is defined as the amount that is paid upon the policyholder’s demise or policy maturity. Sum assured is meant to cover all the expenses and liabilities of your dependent family members. As a general rule of thumb, keeping the sum assured value at least 20 times your annual income is advisable to adjust for inflation. It would help if you also kept in mind that this amount can be customized to suit your budget and needs. 

  1. Policy Term 

Policy term is the duration within which the insurance provider will provide cover to the insured person. It is also the time period within which the contract is active. You choose the policy term at the time of buying your policy. The best life insurance plan will protect the end of this time period. You can customize the policy term as per your needs and requirements. For example, you can choose to stay covered for 20 years if you want your life insurance policy for only 20 years. Some plans will provide you coverage till the age of 99 or more. 

  1. Nominee 

A nominee or beneficiary is the one who is listed in the life insurance contract as the person entitled to receive the benefit in case the policyholder dies. It would be best if you assigned a nominee at the time of buying the policy. However, you may also be allowed to choose the nominees at a later stage. What’s more? You may also be allowed to change your nominees at any point during the tenure of your policy. 

  1. Claim 

After the insured person’s demise, the policy beneficiary can file for a claim with an insurance provider to receive the benefit. However, to ensure that you receive the promised sum assured, you must always buy a policy from trusted insurers with a claim settlement ratio over 90%. 

The best life insurance policy is not that hard to find if you know where to look. All you need to do is understand the key benefits and features to compare carefully before buying a policy. Many insurance providers, like Max Life Insurance, offer helpful online tools to compare and buy policies online. 

The post 7 Features of the Best Life Insurance Policy That Can Ensure a Smooth Sailing for Your Loved Ones’ Future appeared first on Liist Studio.

]]>
Shopping Around For The Right Digital Marketing Technology Stack https://liistudio.com/shopping-around-for-the-right-digital-marketing-technology-stack/52070/ Mon, 03 Jan 2022 06:31:24 +0000 https://liistudio.com/?p=52070 What is Marketing Automation? Marketing automation software automatically automates marketing processes by building automatic workflows according to pre-defined,…

The post Shopping Around For The Right Digital Marketing Technology Stack appeared first on Liist Studio.

]]>
What is Marketing Automation? Marketing automation software automatically automates marketing processes by building automatic workflows according to pre-defined, predetermined sets of criteria. That criteria could either be user-defined or preset-up by the software provider at the time of sale, however, it must always relate to the organization’s business model in some way. It must also be scalable and configurable. Therefore, marketing automation should include solutions that are usable for any size organizations, not just those that specialize in marketing.

The Importance Of Marketing Automation 

In today’s competitive market, setting up the right marketing automation software landscape can mean the difference between success and failure. Many companies are investing in marketing software solutions and using this software to automate their channel management functions and increase their revenue margins. For example, some companies that are creating digital marketing content on TikTok will even resort to websites like TikTokStorm to automatically reach more users. However, these same companies may not have a clear idea of their marketing software landscape. Some may even believe that there is no need for marketing automation because their company does not offer any specialized product or service. While this could be true in some situations, there are other channels of distribution where marketing software could prove beneficial.

For instance, grocery stores have channels running through their stores as well as online. They have channels running in most major cities all over the world, while at the same time, they have limited channels in certain regions. In addition, the needs of the different regions could vary. It could be that certain types of products or services are not as popular in certain regions as they are in others. This means that an Internet presence would not prove helpful for such a small business, while a grocery store could see its potential growth in this environment.

Similarly, a restaurant might have similar needs to a grocery store, as both could benefit from having one-way email marketing campaigns or autoresponders. However, a restaurant might run into more expenses if it were to try and automate this process. In many cases, restaurant managers have found it necessary to hire outside help for such tasks. However, with the advent of different types of marketing automation software solutions, such expenses can be reduced or eliminated entirely. In the long run, such savings and convenience could prove to be quite beneficial for any type of restaurant business.

Digital Marketing

Another example of the challenges involved in making the most out of a marketing software landscape comes from the realm of digital marketing. Digital marketing refers to any channel of marketing that uses digital technology to promote a business. For instance, this could include online advertising, social media marketing, or even search engine optimization, which includes things like article writing, blog posts, video creation, and the likes.

The challenges in this landscape come from two directions. First, one must determine how much money is able to be spent on such marketing efforts without breaking the bank and secondly, how effective such efforts are in generating revenue for the business. While some vendors will offer both of these things in one package, oftentimes a digital marketing service will include multiple types of these bucket services, often at a discounted price, due to the fact that they are all considered to be on an individualized level.

Oftentimes, there are multiple vendors who offer these services, because they are often used by their own individual vendors. However, even though multiple vendors exist, marketers must make sure that they do their research before making any decisions at all. Some marketers will simply visit each of these websites and look at costs, as well as what each service offers. However, many of the vendors have evolved over the last several years and the quality of their offerings has dramatically improved. Because of this, it has become quite common to find a variety of such products within one online marketing software landscape. Some vendors also offer their own customized development platform that allows marketers to build, test, and deploy their own targeted marketing software solutions, while others have integrated development platforms that allow them to easily build extensions for their other product offerings.

Platforms Used In The Industry

When shopping for a complete marketing software landscape, it’s important for a business to first determine exactly what types of platforms their industry uses and whether or not the platforms themselves need to be replaced. After doing these two preliminary steps, a business can then begin shopping around among the various vendors. Because there are so many different vendors in the market, this doesn’t necessarily mean that the business’ needs couldn’t be met by another vendor entirely. With so many choices out there, businesses will likely find that it’s possible to meet all their needs with the assistance of more than one vendor.

The post Shopping Around For The Right Digital Marketing Technology Stack appeared first on Liist Studio.

]]>
Product Releases For New Products https://liistudio.com/product-releases-for-new-products/52067/ Mon, 03 Jan 2022 06:29:40 +0000 https://liistudio.com/?p=52067 Social media has become very popular in the past few years for a number of reasons. First, a…

The post Product Releases For New Products appeared first on Liist Studio.

]]>
Social media has become very popular in the past few years for a number of reasons. First, a lot more people are able to share content online without having to rely on a third party writer. Social media allows anyone with a camera to upload content, which is then picked up by thousands of users across the world. This means any type of business can publish new products to their Facebook page to promote and build hype around their latest launch. If you have not yet joined the frenzy of promoting new products through Facebook, now is definitely the time to do so! Here are three new product releases, you should start promoting immediately.

Why The Customer Experience Is Important

We’ve all heard about the power of customer experience marketing before, but it is even more important now than ever. This is because the new releases that you’re planning on releasing will directly affect how you want your customer to feel while they are using your product or service. The customer experience is so important that businesses nowadays go to great lengths to engage potential consumers. Some are even creating podcasts, and using websites like SpotifyStorm to improve their reach. For example, if you are launching a new product that makes traveling easier, you’ll want to ensure that the customer gets every single benefit out of the product. However, if you launch a travel system that offers customers additional savings on trips, the customer may not feel as much of a need to travel. A podcast will help you get the word out that you have such a system.

The Advantage Of Social Media

Social media allows you to see how your customers are experiencing your new products before you launch them. You can monitor their comments and overall opinion of the product, to help you fine-tune your marketing campaign. From there, you can implement measures that will improve the customer experience and make your social media campaign more effective. For example, one new product release featured a link for a discount code that could be used for an additional 25 percent off purchases at certain locations. Customers didn’t seem to mind the discount, however, because it increased their overall experience, which helped boost sales.

Once you’ve gathered customer feedback and implemented changes that are in line with what they’re saying, you can start to get new releases out into the public. To get people to even notice your new products, you need to make sure that they are properly promoted. One way to do this is to create press releases and post them on social media sites. A press release is essentially a news story that is posted online. When you post one on a media website, such as Facebook or Twitter, you will be able to tell people about new products, promotions, and other announcements without having to make a huge investment in television or radio spots.

Building Hype

As mentioned above, one of the most effective ways to get people excited about your new products is to build hype. Hype, or what some people call “fake excitement,” can be as simple as an email that offers a coupon for your new product. This can go far beyond simple advertising, though, as it’s important to make the customer experience feel as good as possible. If you have a physical product to sell, you should leave basic information like product name, description, and price available on the box itself.

If you’re not promoting your new releases through social media sites, then you should start today. Social media sites are the ideal place to build hype because they allow customers to interact with your brand much more than they would do on a television or radio advertisement. This creates a sense of trust that helps to guarantee customer satisfaction. If you aren’t doing anything to help boost sales, then you could be leaving your customers outside the loop, which is the last thing any company wants. Make your customers feel important by providing information about the product, promotions, and sales.

Product Release Promotion

Another way to help boost sales when it comes to new products is to create a release day. Many companies choose to release their products at a certain time each year. By choosing a release day that coincides with a holiday, you can get people excited about the upcoming release and ensure that they remember to buy it. People who have to wait out for great sales opportunities often become irritated and lose interest in them.

Product releases are a great way to get your name out there. Make sure to stay active on social media sites and other forms of social media. This will help you gain some followers. With the amount of competition out there right now, you need every advantage possible. The more followers you gain, the better chance you have of making a sale. Your goal is to create a buzz about your new product releases, and then you can take over the conversation.

The post Product Releases For New Products appeared first on Liist Studio.

]]>
TOP TIPS TO BUILD YOUR LIVE STREAMING CHANNEL https://liistudio.com/top-tips-to-build-your-live-streaming-channel/52064/ Mon, 03 Jan 2022 06:28:23 +0000 https://liistudio.com/?p=52064 Live streaming is a magnificent tool for marketing your products. Being The cheapest, almost free multiple marketers have…

The post TOP TIPS TO BUILD YOUR LIVE STREAMING CHANNEL appeared first on Liist Studio.

]]>
Live streaming is a magnificent tool for marketing your products. Being The cheapest, almost free multiple marketers have opted for this marketing method. Building a  streaming channel can be a  challenging task.

Live streaming has significantly gained popularity for the past two years. With its effectiveness, the choice of your platform is matters for your live streaming.

However, building your live streaming channel can be challenging and tricky to maintain. Below are top tips to help you build your live streaming channel;

  1. Choose a Trending Title for Streaming

Twitch subscribers will only be attracted to your channel if you have unique and the most trending games. Naturally trending games will win the hearts of multiple viewers and, in the process, discover your live streaming channel.

Search for the top trending games using search engines. The most applauded game on the internet should be your top choice. Popular gaming sites and search engines are a great source of trending and recent games.

Targeting a pre-release copy of any in-demand game will play a vital role in building your streaming channel. It is advisable to avoid over-saturated games since they will not attract traffic on your streaming channel.

 Popular games do not have to be new to be famous; they may exist for months but are high quality. Consider opting for new and trending titles that are in demand.

  1. Keep a Consistent Schedule

In every business you start, consistency is of the essence if you want to be successful. In content production consistent schedule plays a vital role. Set your schedule following your time devotion, but consistency is core.

It is advisable to regularly produce content rather than produce into bursts and retire for a while. This may lead to a decrease in your viewers due to your long silence and inconsistency.

It would be best if you streamed every day. Streamlining twice to thrice per week is ideal if you work on a tight schedule. With this, your target audience will get used to you and your brand, hence a solid relationship.

  1. Keep the Conversation Going

Proper communication is crucial in everything you do. It cements your relationship with your audience all the time. The audience won’t get bored over the silence since it may seem like they don’t exist.

A continuous and meaningful conversation will create a sense of belonging to your viewers. Some of the games call for total concentration but staying mump for long during the live streaming switch session may affect your brand negatively.

Your audience wants a lively and fascinating live stream; the conversation will do wonders for you. Gaming requires engagement; maintain a constant communication flow to engage your audience and viewers.

During gaming, explain some of your primary strategies and how to tackle a game requiring high skills. The audience will be glad to learn; they will share the skills with other people who will be interested in following on your live stream channel.

Always introduce your gaming; it will help the audience know what to expect. Remember your audience wants their questions and chats replied to instantly during the live stream; the constant conversation will solve this problem.

Be mindful of your conversation since it may lead to loss of viewers; discussion entirely depends on your audience.

  1. Welcome and Thank New Subscribers on your Stream

Words like thank you and welcome may seem all simple, but they have a significant impact in real life, not only in gaming. The live streaming may be the source of your daily bread; be courteous to your audience, the source steady and more effective.

Consider thanking and welcoming your new subscribers; they feel appreciated. Mentioning their names makes it even better; the new subscribers feel recognized. The game may require significant attention, but automation live stream plugins will play a vital role.

  1. Follower’s Interaction On Social Media Platforms

Interacting is a significant contribution to your game streaming. Most viewers may not be available during a live streaming session, thus the urge to interact with you on other platforms.

Consider sharing all your other platforms’ social pages with your esteemed subscribers. Be generous enough to share all media handles with your followers, e.g., Facebook, Twitter, etc.

The interaction does have to be gaming-related; any form of sharing may fascinate them. A gaming site will be a top option to share to interact with your audience. The important thing is to have meaningful interaction and bond with your audience.

  1. Give the Audience Incentives for Appreciation

Appreciation is a great way to win the hearts of your audience. A little incentive will bring your followers closer to you; they will recommend other subscribers who wish to receive small giveaways.

Start-up contest with followers and strictly adhere to the platform’s rules to avoid conflicts. You can reward your audience with giveaways like;

  • Gifts’ cards
  • Games
  • Games service subscription

Of course, the gifting entirely depends on developing your channel; as it grows, you can look at sponsored gifts from different companies.

Conclusion

Live streaming channels will grow if you apply all the above simple tips. Constantly conversing with your followers is a significant way to grow your channel. Gamers live big for strictly sticking to a streaming schedule for your gaming.

Subscribers will switch to your competitors if you don’t offer quality gaming.

The post TOP TIPS TO BUILD YOUR LIVE STREAMING CHANNEL appeared first on Liist Studio.

]]>
Traditional Vs Digital Marketing https://liistudio.com/traditional-vs-digital-marketing/52061/ Mon, 03 Jan 2022 06:16:10 +0000 https://liistudio.com/?p=52061 Traditional Vs digital marketing… who came up with these terms? What does it mean? Well, these are just…

The post Traditional Vs Digital Marketing appeared first on Liist Studio.

]]>
Traditional Vs digital marketing… who came up with these terms? What does it mean? Well, these are just some of the questions that you might be thinking about if you are trying to decide between traditional marketing techniques and modern internet marketing. But what they do not realize is that both these marketing methods have a higher chance of being successful when you employ both in tandem. Some business owners often argue over which one is more effective for promoting their products and services and who is really better for advertising their product and services through the internet.

Strategies

However, there are a few differences between traditional marketing and digital content marketing. One of them is the fact that traditional marketing still relies on traditional business strategies. When we refer to traditional marketing, we mean using traditional sales, advertising, and distributing printed materials. On the other hand, digital content marketing is more global and less focused on local businesses alone.

Target Audience

With traditional marketing, it is still important to reach out to your target audience even if you are using online marketing methods. This is because you still need to reach out to your potential customers. With digital marketing, however, you can easily reach out to your target audience no matter where they are. There are even ways to buy YouTube likes. You do not necessarily need to send them a physical piece of mail or postcards. Instead, you can utilize the power of the internet as your medium of promotion.

The Best Of Both Worlds

Now that you know how traditional marketing works and how digital content marketing works, you would probably be interested in learning more about how you can make use of both these tools to promote your products and services. To do this, you must first be able to establish your target audience. If you have a product or service that caters to a specific group of people, you can go ahead to use traditional marketing methods to market those people. For instance, if you are selling dog collars, you can go ahead to advertise your product using traditional media such as flyers, billboards, ads in magazines, and so on.

However, if you are targeting a broad range of people, then it would be more advisable for you to use digital media. This way, you will be able to reach more people without spending too much on traditional advertising. Once you have established who your target audience is, you then need to establish a concrete plan on how you can effectively market to them. For example, you can decide to create a website for your product. By creating a website, you will be able to put in your existing website, blog, and social media accounts. By doing so, you will be able to effectively increase your brand’s exposure and get more exposure for your product.

Competition

If you want to compete with your competitors in the online industry, you need to ensure that you have an effective and highly regarded online presence. One way to do this is by creating a website that is optimized to promote your products. In addition, by adding relevant content to your site, you will be able to effectively increase the number of clicks and conversions on your advertisements. However, even though you already have a high-ranked website, you can still go-ahead to boost your ranking using the help of Google AdWords. The good thing about Google AdWords is that it allows you to run several advertising campaigns simultaneously. In addition, it provides you with instant reports which will help you determine which of your ads are performing and which ones are not performing well.

Means Of Reaching An Audience

One of the major differences between traditional marketing methods and online advertising is the fact that traditional marketing is usually conducted through traditional means like television, radio, and print. However, the advent of the internet has changed everything. Today, a business owner can run multiple advertising campaigns using the internet because they do not need to pay a fixed budget for each ad. Since there are plenty of advertising sites available on the internet, there is no need for a business owner to create a website. On the other hand, if you want to be successful in your endeavor to expand your market, you need to expand your advertising budget using traditional methods like television, radio, and print, but you can easily do this with the help of social media marketing.

Social media platforms such as Facebook and Twitter are great platforms that allow you to interact with your customers. However, unlike traditional marketing, mobile users do not see your advertisements on their phones, tablets, and laptops. This means that if you want to increase the number of people who see your advertisement, you need to use mobile user-based advertising. Fortunately, many online marketing companies have created campaigns that target mobile users, and by doing so, you can increase the number of people who will notice your advertisement and this will result in a more efficient advertising campaign.

The post Traditional Vs Digital Marketing appeared first on Liist Studio.

]]>